u/Kk-sculpt

Abrams from Deadlock is finally ready 🖤
Fully test printed, presupported, and split into 30 parts.

Abrams from Deadlock is finally ready 🖤
Fully test printed, presupported, and split into 30 parts.

Abrams from Deadlock is finally ready 🖤
Fully test printed, presupported, and split into 30 parts. Hope you’ll enjoy printing him as much as we enjoyed making the model.

Technical details:

Size: 26 × 25 × 29 cm
Supports: presupported
Parts: 30

A few printing notes:

— The supports should handle downscaling to around 1/10 scale without major issues.
— Most supports can be removed by hand pretty easily, except for the glasses — please be careful with those. I’d recommend removing them in warm water or trimming them before final curing.
— Around 90% of the model is hollowed. If you scale it down significantly, I strongly recommend letting the parts dry naturally instead of using aggressive drying methods.
— If you reduce the size a lot, keep an eye on the cloak and the book page, as some walls may become extremely thin or even develop holes.

As always, the model has been fully test printed.

Happy printing! :*

Abrams from Deadlock is finally ready 🖤
Fully test printed, presupported, and split into 30 parts. Hope you’ll enjoy printing him as much as we enjoyed making the model.

Technical details:

Size: 26 × 25 × 29 cm
Supports: presupported
Parts: 30

A few printing notes:

— The supports should handle downscaling to around 1/10 scale without major issues.
— Most supports can be removed by hand pretty easily, except for the glasses — please be careful with those. I’d recommend removing them in warm water or trimming them before final curing.
— Around 90% of the model is hollowed. If you scale it down significantly, I strongly recommend letting the parts dry naturally instead of using aggressive drying methods.
— If you reduce the size a lot, keep an eye on the cloak and the book page, as some walls may become extremely thin or even develop holes.

As always, the model has been fully test printed.

Happy printing! :*

Abrams from Deadlock is finally ready 🖤
Fully test printed, presupported, and split into 30 parts.

https://cults3d.com/:4401770

Technical details:

Size: 26 × 25 × 29 cm
Supports: presupported
Parts: 30

A few printing notes:

— The supports should handle downscaling to around 1/10 scale without major issues.
— Most supports can be removed by hand pretty easily, except for the glasses — please be careful with those. I’d recommend removing them in warm water or trimming them before final curing.
— Around 90% of the model is hollowed. If you scale it down significantly, I strongly recommend letting the parts dry naturally instead of using aggressive drying methods.
— If you reduce the size a lot, keep an eye on the cloak and the book page, as some walls may become extremely thin or even develop holes.

As always, the model has been fully test printed.

https://www.patreon.com/Kozemerchak

Technical details:

Size: 26 × 25 × 29 cm
Supports: presupported
Parts: 30

A few printing notes:

— The supports should handle downscaling to around 1/10 scale without major issues.
— Most supports can be removed by hand pretty easily, except for the glasses — please be careful with those. I’d recommend removing them in warm water or trimming them before final curing.
— Around 90% of the model is hollowed. If you scale it down significantly, I strongly recommend letting the parts dry naturally instead of using aggressive drying methods.
— If you reduce the size a lot, keep an eye on the cloak and the book page, as some walls may become extremely thin or even develop holes.

Abrams from Deadlock is finally ready 🖤
Fully test printed, presupported, and split into 30 parts.

Soft: Zbrush, blender