▲ 12 r/montblanc
Does my pen need a service?
It’s a pix rollerball, and the metal band above the clip is coming away from the body. Should I be sending this off to MB for service?
u/Ctrl5altDelete — 1 day ago
u/Ctrl5altDelete
▲ 0 r/jellyfin
Jellyfin/server to Echo Dot
I have a home server running trueNAS, and a Raspberry Pi that runs my HA. I have a lot of audiobooks on my home server that my daughter would like to listen to with her Echo Dot at night as she falls asleep. Her phone is on screen time so I’d like a way for her to be able to ask Alexa to play an audiobook from the home server. Though I have no idea where to start with this.
I have got Jellyfin on the home server, which I use to stream media through the house, including audio books, but don’t know how to get it to an Echo?
Can anyone offer any advice please?
u/Ctrl5altDelete — 3 days ago
Stream from TrueNAS via HA to Echo Dot
I have a home server running trueNAS, and a Raspberry Pi that runs my HA. I have a lot of audiobooks on my home server that my daughter would like to listen to with her Echo Dot at night as she falls asleep. Her phone is on screen time so I’d like a way for her to be able to ask Alexa to play an audiobook from the home server. Though I have no idea where to start with this.
I have got Jellyfin on the home server, which I use to stream media through the house, including audio books, but don’t know how to get it to an Echo?
Can anyone offer any advice please?
u/Ctrl5altDelete — 3 days ago
▲ 145 r/truenas
Cooing for LSI 9300-16i
I have installed my HBA card today, knowing that this gets hot I have added a 90mm fan blowing onto it. The adapter is 3D printed in two parts and then assembled on top of the heatsink. This is the model I used https://makerworld.com/models/2769035 I printed it in PETG to resist warping.
u/Ctrl5altDelete — 7 days ago
▲ 0 r/truenas
TrueNAS Community Goldeneye. I am getting a HBA card today and want to make sure I slot it in correctly. The card is PCIe3x8. I have a free x8 slot on the MB, with my GPU in the x16 slot. Is this the correct config.?
It’s this card:
https://amzn.eu/d/03usDyBu
Aorus Z390 pro MB, i5-9600KF, GTX 1660 Super
u/Ctrl5altDelete — 8 days ago
▲ 6 r/truenas
I have a HBA card coming today. Will it matter if I have a set of discs in a pool where some of them are plugged into the HBA card and some to the SATA ports on the motherboard?
u/Ctrl5altDelete — 9 days ago
▲ 5 r/truenas
Truenas Goldeneye. TBH I don't care if I don't get an extra 3Tb and it restricts it to 2Tb extra space. I have the drive spare and have only 1 so cannot mirror. I have 4 2Tb HDDs in a RAIDZ1 at the moment and wonder if it's possible to expand with my spare drive.
u/Ctrl5altDelete — 14 days ago
▲ 279 r/truenas
This is my newly built TrueNAS server (Goldeneye) that I have put together from on older PC that I have upgraded. The only new part I have bought here is the case. I'm using it as general home server as well as media on Jellyfin and image storage/viewing with Immich.
- Fractal Design Define R5
- Intel i5-9600KF
- Gigabyte Aorus Z390 Pro
- 32Gb DDR4
- NVIDIA GTX 1660 Super
- 750W PSU
- 60Gb SSD (boot)
- 250Gb NVMe (apps)
- 4x 2Tb HDD (RAIDZ1 storage pool)
- 1x 1Tb HDD (Stripe Time Machine)
- 1x 250Gb SSD (unused)
I also have a further 2x 1Tb HDDs and 1x 3Tb HDD that I have not used yet, I have gathered quite a lot over the 25 years I have been building PCs but all the ones I am using in this are less than 10 years old and not had hard lives. I have maxed out the SATA ports on the MB currently but I have a PCIe card I can add to put an additional 4 drives in.
u/Ctrl5altDelete — 15 days ago
▲ 1 r/truenas
I have a new NAS system I have built from an old PC, it has a GTX 1660 Super card in which I want to use for transcoding on Jellyfin and image analysis on Immich. I think I have got the settings right but how can I tell if it’s working? There’s no GPU widget like the CPU one which would have been my go to. Any help appreciated, thanks!
u/Ctrl5altDelete — 15 days ago