Ninja 400abs crank no start
Okay, I bought a 2018 ninja 400 abs for 200 bucks. The original owner attempted a valve adjustment and timed it wrong bending valves. Didn't want to mess with it, needed it gone. Considering it has a yoshi alpha full exhaust on it, I couldn't pass it up. I bought a new head, head gasket, head bolts, I got a repair manual from Kawasaki. Had my work verified by master tech as far as timing. Replaced plugs as well. Went to try to fire her up, cranks, won't fire up. I've verified I have fuel from the pump, to the rail, the injectors aren't clogged, everything is plugged in other than the headlight assembly, I also replaced the battery as well( oem has a bad cell). The bike was delivered on it's side so I also made sure the tip over sensor was properly oriented and reset. I work at a car shop. I was told I'm not getting injector pulse. Bike has 15 k on it. We don't have access to motorcycle obd scanner. From what I gather injectors pulse goes off crank sensor. The stator was within spec. ,(from what I'm told). I have a replacement just in case. Anyone out there have any pointers?