Guys please bare with me as I have never built a pc or worked on one before, I replaced the Ibuypower aio with a arctic one and it was pretty much perfect until the cpu housing that pops into the actual pump that’s screwed onto the cpu doesn’t fit because the radiator is in the way. I had to remove a screw from one of the radiator fans just to barely squeeze it in there and get it to fit. I heard it snap in but I definitely feel like it’s not it all the way and the radiator is pushing on that cpu housing. What I’m trying to say is it’s a very tight fit. I know I can move the radiator somewhere else but I really wanted to match the configuration I had before. Also the tubes are coming out the bottom of the pump instead of the right side like before. I don’t know if this is even a problem I just don’t want the radiator to put so much pressure on the cpu fan/cover putting pressure on the pump then the motherboard or cpu. Thanks