u/Fjolde11

https://preview.redd.it/9vkfk7u7y40h1.jpg?width=2992&format=pjpg&auto=webp&s=73be60fffc264695bf1807d221ed35f76e2007b2

Centauri Carbon with SUNLU Petg.

Flow Ratio: .95

Temp: 245

Plate Temp: 70

I've run a temperature test which is how I got 245 temp. However, the test wasn't very clear and I can't be sure. I'm running a retraction tower right now.

I think it's partly an adhesion issue but I'm not any kind of expert and want to ask before I go and play with all kinds of settings.

https://preview.redd.it/j89ltttdw40h1.jpg?width=2992&format=pjpg&auto=webp&s=0c2cf96c1d4c789c646ef8ec36a85d0551f56490

I'm pretty sure it's a plate adhesion issue. Not pictured, most of the supports have similar issues.

Any tips or recommended settings I should change?

I'm using a centauri carbon with SUNLU Petg

Flow Ratio: .95

Temp: 245

Plate Temp: 70

I don't know what other settings to mention, sorry about that.

So far, I've run a temperature test and 245 seems to be the right temp but the test wasn't very clear. I'm currently printing up a retraction tower.