Anyone know why my Ethernet is capped to 100 mbps and how to fix it? It’s cat 5e which when I searched said it could go up to 1000 mbps.
I’ve downloaded my most recent LAN drivers, WiFi drivers, and Bluetooth drivers.
I’ve ran
netsh winsock reset
netsh int ip reset
In cmd as admin
I’ve been in my control panel and changed my speed & duplex from auto to 2.5gbps and full duplex
When turning on freshly built pc the VGA light turns on for a bit and there’s buzzing coming from the pc, when I searched this up it said it might be the GPU even if it has the fans spinning and rgb on. Anyone able to help
Any1 able to help, do I install the most recent bios version, I have the 9850x3d and the gigabyte x870 aorus elite, I’ve searched it up and there’s a gigabyte page saying that their AMD AGESA 1.2.8.0 BIOS Update is specifically engineered to provide optimized support for the 9850x3d, so does it matter if I use F11, F12a, or F12b (all have agesa 1.2.8.0).
Any1 able to help, do I install the most recent bios version, I have the 9850x3d and the gigabyte x870 aorus elite, I’ve searched it up and there’s a gigabyte page saying that their AMD AGESA 1.2.8.0 BIOS Update is specifically engineered to provide optimized support for the 9850x3d, so does it matter if I use F11, F12a, or F12b (all have agesa 1.2.8.0).
Just turned my pc on for the first time and it’s asking if I want to enable x3d turbo mode to boost gaming performance. y/n? I’ve searched it up and I’ve seen things like it’s mainly for a cpu like the 9900/9950x3d I have the 9850x3d also seen ppl say it actually worsens performance
Is it fine to have the fan cable go here the cables too short for it to go through other ways. This is assuming I need the 4 pin in the motherboard and the 2 pin in the PSU which is what I was told when I had searched it up
This is my first build so sorry if it’s a dumb question.
Also sorry for the length of the message.
First of all, I plan on having the radiator in the back part and have the tubes at the top and come through to the front which may cause the pump to be upside down, would there be any problems with this.
Second of all the Liquid Freezer 3 Pro comes with a three-way usb cable that connects to all the fans (don’t know what else to call it) but I’ve taken the fans off as I’m going to be using Lian li wireless fans, the wireless fans are daisy chained together and have 2 cables do they have to be connected to the cable that’s running through the aio tubes?
If not do I just connect the lian li fans like regular and leave the cable empty hidden in the back? And the LF3 pro comes with 2 cables, the all in one single pwm cable that’d power the pump, VRM fan, and radiator fans simultaneously or a splitter cable with three seperate connectors for independent control, do I use the aio or splitter cable? And if I use the splitter cable would I still need to put the fan cable in if I don’t have the fans linked to the cable pre-installed in the AIO?
Also if I go splitter cable and have to have all 3 plugged in I don’t know if I’d have enough usb slots on the mobo, I have a gigabyte aorus elite x870 and I’m going to have 3 different groups of fans totalling to 6 cables from them, I plan on using the three usb -> sata that comes with the Lian li wireless fans to connect the PWM (I think that’s what I’m supposed to connect out of the 2 (PWM/RGB) please correct me if I’m wrong) cables to the PSU
If anyone actually reads this and helps I’ll be very grateful.
This is my first build so sorry if it’s a dumb question.
First of all, I plan on having the radiator in the back part and have the tubes at the top and come through to the front which may cause the pump to be upside down, would there be any problems with this.
Second of all the Liquid Freezer 3 Pro comes with a three-way usb cable that connects to all the fans (don’t know what else to call it) but I’ve taken the fans off as I’m going to be using Lian li wireless fans, the wireless fans are daisy chained together and have 2 cables do they have to be connected to the cable that’s running through the aio tubes?
If not do I just connect the lian li fans like regular and leave the cable empty hidden in the back? And the LF3 pro comes with 2 cables, the all in one single pwm cable that’d power the pump, VRM fan, and radiator fans simultaneously or a splitter cable with three seperate connectors for independent control, do I use the aio or splitter cable? And if I use the splitter cable would I still need to put the fan cable in if I don’t have the fans linked to the cable pre-installed in the AIO?
Also if I go splitter cable and have to have all 3 plugged in I don’t know if I’d have enough usb slots on the mobo, I have a gigabyte aorus elite x870 and I’m going to have 3 different groups of fans totalling to 6 cables from them, I plan on using the three usb -> sata that comes with the Lian li wireless fans to connect the PWM (I think that’s what I’m supposed to connect out of the 2 (PWM/RGB) please correct me if I’m wrong) cables to the PSU
If anyone actually reads this and helps I’ll be very grateful.
I wiped down my desk as my pc parts were coming soon and they came earlier then expected, how long should I wait before starting to build my pc? I used dettol wipes and there’s still a smell on my hands/the room in general and I’ve left a window open. Still waiting on 2 sets of fans and a screwdriver to arrive anyway but wanted to know.