u/Constant_Memory

Scrolling through emails I came across one from Neiman Marcus. Check out the window on this baby!!!

The first two photos are the look I’m going for. The other photos are of my casting and the stone I’m setting.

I have an 18k ring I cast from a wax carving I made and now I’m ready to set the 5 ct tourmaline. It’s a heavy walled bezel (approx 2mm) that I want to eventually be flat around the stone and look castellated without actually putting vertical cuts in the bezel. Like the first two images above.

Typically with thick walled bezels one would thin the inner edge of the bezel so you have less metal to move over the stone. Then you’d gently hammer set the stone and burnish out the edge of the bezel. In this case I want the top of the bezel to be flat and not angled. I definitely don’t want to crack the stone.

Does anyone have suggestions as to how to proceed? Do I thin the inside wall anyway to make it fold over the stone and then may be bright cut with a graver to level it out so it’s not angled?

Thanks in advance!

I reached out to customer support on 4/18 because I upgraded my phone and my previously working Ozlos would not connect. They got back to me on 4-20 with suggestions to connect to http://update.ozlosleep.com. I updated the firmware, cleared the Bluetooth list, removed Bluetooth connection from old phone, performed factory reset and probably some other steps but nothing has worked. I can see and connect to them in my Bluetooth list but the app won’t connect to them when I’m pairing mode. Oh and I also deleted and reinstalled the app.

Replied to customer support email on 4/20 and still haven’t heard back. What more can I do to get these things working?

Can someone from Ozlo please reach out to me??