So after 2 months I finally got a DeepCool CH270 case and got all my components placed. There’s are a couple little things I’d like to redo but overall I’m loving this case and build!
So recently I put spacers on my car, exact same model, 12mm slpacing, size and even measured them.
I noticed immediately that my right front wheel is so much more sunken in than my left wheel. I had my mechanic align everything, the camber was only off by 0.2 from left to right and he also positioned the left spring properly since it was slightly off its perch, but that didn’t fix it.
Car is a 2018 QV lowered on ST springs with no prior CARFAX accident report history. Anyone have suggestions?
Hi all,
I have only seen 1 or 2 posts about this issue and I am about ready to pull my hair out. I got a Kraken Elite 360 v2 about a month ago and I have had zero issues up until now.
I did a clean reboot and turned my PC fully off, PSU, etc. to re-arrange some things. I turn it back on and NZXT CAM software opens and closes 3 times quickly, then stays open on a WHITE SCREEN.
I sat here for hours upon hours trying everything I can think of. I even replaced the whole cooler with a brand new one thinking it was a hardware issue. I have gotten to the point of narrowing it down to GPU drivers.
I have safe mode and DDU wiped all my AMD/nvidia drivers (I have a 5090). When I reboot with no drivers and open CAM it opens perfectly, but it gives me the warning (GPU Driver needs installed).
As soon as I install a new GPU driver and reboot, the same issue keeps appearing. I've tried installing older GPU drivers from March but it still is doing this.
I am desperate for help. Does anyone have any clues? This windows install is brand new, only about 2 months old with minimal programs etc. Please shoot me your ideas and help! Thank you