r/SwitchPirates

Finally I found a version of PPSSPP and runs perfectly with firmware 22.1.0!!

https://preview.redd.it/ay3qdzfw4bug1.png?width=1926&format=png&auto=webp&s=9bbb3aa9168a74fda7bb5392dc2c8220ef545ba1

https://preview.redd.it/ymninzfw4bug1.png?width=1940&format=png&auto=webp&s=5d82a292dba13d5d3630980a1a43279412596b55

I'm stuck with hekate it keeps crashing when I try to partition the SD card gets stuck at analyzing and the charge doesn't go up or down till I restart the switch

https://preview.redd.it/mxj0himnkgug1.jpg?width=4080&format=pjpg&auto=webp&s=efff726d363ee6257b2adde9a65f9224bfb9b385

I've had a bit of a nightmare tonight. Booted into OFW for the first time in a while and updated system without paying attention. This led to me getting a fuse error which meant the Switch couldn't wake from sleep. I noticed I needed to update Atmosphere and Hekate, which I did. I updated fusee to the current version but now I am getting this error whenever I boot into any mode. The console will seem normal for a few seconds but then this will flash up and I have to reboot. Am I fucked? Am I best off restoring from a backup? I've no idea where I have gone wrong.

Im new into switch modding so please excuse my dumb question.

I have a legitimate digital copy of Hollow Knight that i bought on my unmodded switch.

Before giving it to a guy who modded it for me, i have moved all the game data from the system memory to the SD card (not the one used for the modding! I was afraid that the guy would factory reset my console and i would lose my saves, so i wanted to have them somewhere)

After modding it, I have decided to install a clean version of the game on my emuMMC (did not want to switch between OFW and emuMMC just to play a game). I was ready to lose all my saves and start again, but to my surprise, all my saves are still there.

Should I be worried that I did not lose my saves?

Nintendo servers are obviously blocked (checked many times just to be sure). How did this happen? Can someone explain the science behind it?

I recently setup cfw for the Switch and was trying to tinfoil or the HB Appstore but it tells me it doesn't support the current ABI.

I assume it's probably due to my Switch still being on v16.0.3 what version should I update to? And how? (I have the V1 Nintendo Switch if that changes anything I have to do)

Hey everyone. So here is the backstory to fully understand my problem. The day i put a CFW on my switch i installed a 22.0.0 FW. I realized that i couldnt do anything with it. So i watched an unfortunately outdated video and i downgraded to 21.2.0 using daybreak.

When i tried to boot up into the SysMMC it showed me a atmosphere error mentioning the 21.2.0 FW. After that i tried to do a NAND Fix Level 1 using FW22.0.0. In the TegraExplorer it shows that i have FW 22.0.0 installed but i get a error saying pkg1/pkg2 mismatch error. I have talked with a redditor who seemed experienced and walked me through the troubleshoot and his main suspicion is that the update simply failed to install properly but still displays 22.0.0.

He said its because i have a fuse mismatch (22/23 in the HW & Fuses). Whats the best i can do? (And no i dont have a backup from when everything worked flawlessly, and yes i know i was stupid not to but im here trying to learn and fix this whole mess) :)

See the pictures for more details:

HW & Fuses

TegraExplorer

Fuse mismatch

So I finally got my switch modded with the addition of acropolis and skyline, but I didn't have my Smash save file installed before I modded the switch, so now basically I have Smash saying it's installed on my sysnand, and Smash with the cloud and arrow on my emmunand. I'm not able to download it from emmunand and JKSV doesn't show my Smash save data when my user is highlighted. I also haven't played smash on my sysnand since I reinstalled it there. Could that be the issue?

Long story short, I got a new modded OLED, so I backed up my V1 Switch’s SD card and formatted it so I could use it on my new OLED.

Is there any way to extract my game saves from the backup I made of my old emunand on my computer, so I can put the saves on my OLED?

I followed a video on how to mod the switch and did it correctly all the way through, but i realized at the end that i didn't have any app installed before hand to get into the title takeover homebrew menu on emummc. This is because everything needed to be reinstalled since i hadn't used the console in a while, which I didn't notice. Now i have no idea what to do or how to fix this, and I was thinking of removing everything and trying the whole thing again, but I don't know how to do that either.

Trying to find threads of similar issues to this are hard to follow since I don't know much about this space, so if anyone could help that would be great.

So basically first time doing this.
I followed a tutorial and dumped the game with the xci file.
But when i try to open it it says that the data is damaged and to run a check, i make it run, and it says something along the lines that it can't be repaired and contact nintendo.
Or to try to update the switch.

I wondered if the issue was with the xci file but i just opened it from the emulator on my pc and it works perfectly here.
So...what do i do?

I was trying to make some changes to a brilliant diamond save on pkhex(android) but when I went to save the file it gives error of the file being corrupted and unable to extract. What should I do?

im looking to reset my modded switch as it it was first loaded up straight after the chip being placed in it. How do I do that?

Things I already tried:

Airplane mode / internet ON

removed 90DNS

deleting all Tinfoil-related folders

But the issue still persists.

Any idea what could be causing this?

So, I live in Russia, and it seems that I can't access anything network related at all. Not eShop, not game updates, nothing. Any ways to improve that? DNS addresses perhaps?