r/Packout

I run an equipment company and I love Milwaukee and their packout boxes.

I need help with a similar 3D file. It is for the m12 1/2 impact.

Does anyone have one?

Inspired by /u/Jriddim and his Packout Vacuum + Debris Separator setup, I decided to put together a mini-stack of my own.

The only change I made was to simplify the half-dolly. I believe he used casters that attach with four screws and had to cut a wooden spacer. I don’t want any wood on my stack as my vacuum will get extremely dirty and need washing pretty often.

I opted to cannibalize a 20 plus year old Craftsman creeper’s casters for my mini-stack and forgo making a spacer at all.

These stem casters use a female cap (Connector Cap) and are perfect for a low profile installation. I purchased a few of the OG Compact Packout Wall Plates from Napa (48-22-8486) https://www.napaonline.com/en/p/MIL48228486 and for the Compact Dolly, I hogged out the holes with a 3/8” drill bit and my die grinder with a burr bit to fit the hex head “cap” snugly.

3 washers stacked on the stem compensated for the thickness difference between the compact wall plate being thinner than the frame of the old creeper, and also allowed me to easily grab the flats of the stem caster itself with a crescent wrench. A little thread locker on the rusty stem, a little Red N Tacky grease on the ancient ball bearings. And she rolls smooth!

First job cleanup was a breeze. Loving the Proper Tool Company charger mount.

Got this 3D printed tray in the mail from Esty yesterday! I am very impressed and it's a perfect fit too! I can ditch the case that my socket kit came with now! ZLLDesigns is the Esty seller fyi.