r/HMMWV

▲ 35 r/HMMWV

Question

I’m sure you guys have seen this channel on youtube Hummerkingz.

My question is, how could I build my own Humvee like this?? Where do you even get the doors, ballistic windows, TURRET, etc.

Ive looked on iron planet, (govplanet) and ebay, stuff like that, how do i make a build like this on my own?

u/Beginning_Bed_8359 — 2 days ago
▲ 46 r/HMMWV

Customer truck getting some attention…

Batteries, bus bar, cables, terminals, hold-down…

u/AntiqueAd9913 — 3 days ago
🔥 Hot ▲ 53 r/HMMWV

Painted USC Industry Doors

Painted the doors I posted a few weeks back.

I am going to preface this post with: painting is not something I’m great at, nor do I enjoy doing whether it’s painting a room in the house or HMMWV doors. I am learning as I go and by no means am I am expert.

I posted a picture of the paint color code that I used. It’s the same one that the guy on YouTube that paints “Matilda” used. You can go to Home Depot show them this code and get the exact same paint.

On the first door I removed the hinges and taped the black edges and door lock/handle. Then I used a 180 grit sanding block on all the fiberglass, and cleaned all the dust with a microfiber towel and alcohol. I used a 4 inch foam roller to begin putting the paint on the door. It took a few coats of paint to get it completely covered. I should have used a grittier sanding block to rough up the fiberglass doors, I also learned using a good brush eliminated the need to have to tape and worked better than the foam roller.

When putting the door back on it did not fit as it did before. Apparently the layers of paint can cause this, but I also learned to mark the top and bottom hinges to put them back on in the same spots. This made the job easier for the rest of the doors. I also had to loosen some of the strikers to re adjust them.

Overall I think it came out good enough. Looks great from a distance, but you can notice the imperfections when you get up close.

At some point I might lightly sand the paint and spray a coat on, but it’s good enough for now.

Hope this helps someone else.

u/HummerOffRoadNJ — 4 days ago
▲ 30 r/HMMWV+1 crossposts

Flooring day at the shop!

Today, working on applying new floor mats to the Humvee. Using Dynadeck from Dynamat.

u/AntiqueAd9913 — 5 days ago
▲ 4 r/HMMWV+1 crossposts

Coolant temp issue

I do auto school and we had a donation from the county to work on their Humvee, It is a 2009 with a 6.5 NA diesel. The issue i am expiriencing is the gauge wont read the coolant temp, so then we check wether or not the gauge is broken and its not so then we assumed it would either be the wiring to the sensor or oneof the sensors. I feel like i am missing something and I cant find any info, wondering if there is like a common issue or something. All th context ik is that it used to be a military vechile and now its disaster control

reddit.com
u/Aggressive-Cicada222 — 4 days ago
▲ 22 r/HMMWV+2 crossposts

Not one Humvee is same…

Every Humvee I touch measures and fits differently than the previous. This video highlights a bit of that.

u/AntiqueAd9913 — 5 days ago