Li'l Petroleum Boiler 2.0
i did a thing (again) another li'l petroleum boiler , in truth is the old one but modified.
this time the cooling sistem is mooooore simple: two layer, one with hot petroleum , another with water that will become steam for the turbine.
so double trouble for elettricity, the first one from the steam and the second from the already P. formed and ready for burning.
how it works? simple:
1)first room warm the Crude Oil from the lava in the ground with an automatic door, controlled with a thermo that open the door (isulating the room) over 415°c .
2)the second door open over a 3 green AND logic, the first check two tile if there is P. whit the first OUTPUT in the one of the second INPUT of the 2nd AND and another tile with P. . the 3rd AND take the 2nd AND OUTPUT and check on the other side if there is few P. in the cooling corridor.
3)the cooling corridor is a really simple 2 tile tall , vacued before where i put a first a glass tile for conduct heat and the second up tile block the steam. the steam was water that it was warmed from the hot P. stream. litlle tip, put a first layer of P. under 90°c , then the water, in the already 2 tile space of the corridor.
4)the last door open when is under 127°C for simplicity and a steel pump will take the P. away why all this? because yes, and because i like to do thing new, and in finally i still dont have super coolant..... sigh....
hope you like it.
PS: if you want do it try to respect the height of tiles because the 2nd door can conduct Heat if is in contact with the P. from the 2 sections