Lightbar install (2020 WRX
I've long wanted to install a light bar on my 2020 WRX, and finally got around to it during the Victoria Day long weekend.
Some notes on the items purchased:
First: The light bar
Second: The switch
https://smkfabrication.com/product/subaru-dash-switch-type-3b/
I started by removing the front bumper. After that, I bolted in the light bars themselves. The unit I chose is from eBay, but very similar to the Diode Dynamics one.
Once bolted in, I ran the cabling from the lights to the battery/fuse panel. My lights came with a relay and inline fuse, which I tucked under the cover beside the fuse panel above the wheel well and zip ties in place. I ran the cabling through the rubber grommet inside the wheel well and connected to the switch in the cabin. I did seal up around the rubber grommet using marine sealant because I'm paranoid about water ingress.
After buttoning everything up, it looks amazing. It's brighter than I initially thought, so I really only intend to use it on back roads.
I repeatedly tested the lights as I ran the wiring to be sure I didn't clip anything.
Edit: posting here in case it might help someone else along the way, and I'm happy with how it turned out.