u/StayLiquidy

I have an old spare MSI GS65 Stealth laptop panel and I want to find driver board to make it into an external monitor. I can 3D Print all the enclosure buttons etc I just need to find the board. Idk how to even go about figure out what the pinout is on the monitor I have attached pictures for anyone that can figure it out. Any help would be amazing I have been holding onto this for awhile waiting to do this project. Model number of display is B156HAN06.0 AU Optronics. Thanks !

From Ribbon Cable

From back of Display

I have a old spare MSI GS65 Stealth laptop panel and I want to find driver board to make it into an external monitor. I can 3D Print all the enclosure buttons etc I just need to find the board. Idk how to even go about figure out what the pinout is on the monitor I have attached pictures for anyone that can figure it out. Any help would be amazing I have been holding onto this for awhile waiting to do this project. Model number of display is B156HAN06.0 AU Optronics. Thanks !

https://preview.redd.it/nk6m14ldkm0h1.jpg?width=1280&format=pjpg&auto=webp&s=8d85c231269a068299dab5dd4c90aadf40b29db6

I am wondering if this practice attempts are enough to mod the switch lite obviously they are not pretty, I am using liquid flux and 315c iron. Just using some tiny wire and trying to raw dog connect them to capacitors on a junk ESP32-CAM. Any tips welcome please don't bully my shitty soldering too much lol !

https://preview.redd.it/chq5mzz43zzg1.jpg?width=1280&format=pjpg&auto=webp&s=b01239e2876e682a1b623ef5d531a2d3bddd4d6b

https://preview.redd.it/9y4wc1053zzg1.jpg?width=1280&format=pjpg&auto=webp&s=d1e16a6387bda4b6b4bd63f08ff224354990ede2

I am wondering if this practice attempts are enough to mod the switch lite obviously they are not pretty, I am using liquid flux and 315c iron. Just using some tiny wire and trying to raw dog connect them to capacitors on a junk ESP32-CAM. Any tips welcome please don't bully my shitty soldering too much lol !

https://preview.redd.it/o30abid52zzg1.jpg?width=1280&format=pjpg&auto=webp&s=808bbc95183dc564f92aa7db75b6b0585b240ad4

https://preview.redd.it/gqslcid52zzg1.jpg?width=1280&format=pjpg&auto=webp&s=56980b5148ca8e84fbfaa7d859957eee392a0eb7

https://preview.redd.it/s512yhd52zzg1.jpg?width=1280&format=pjpg&auto=webp&s=ff8b4f7a057c057fa1e1da1a2fa8e8fe61903482

I am at a complete loss at this point my printer was on a janky table I made myself and I finally got something sturdy to put it on so I put it on that figuring it would help print quality considering its sturdier. To my surprise not a single print has worked since. I didn't use my printer for maybe a month before the swap but before that it was working flawlessly. I have an Elegoo Neptune 4 Plus using Orca Slicer, and regular PLA all different kinds thinking maybe filament issues idk. I have tried cleaning the nozzle I have tried cleaning the build plate I've tried putting glue on the build plate I've tried leveling it automatically I've tried leveling it manually. nothing will work it just doesn't seem to stick to the build plate. the trial strip it does before the print sticks just fine and at one point the print was at some level sticking but maybe a minute in it would just fall apart. I have orca set to 0.4mm nozzle and I have a 0.4mm nozzle all settings for prints are default for my printer which has always worked before. At this point I'm honestly thinking I need a new printer because what else do I do. I can try buying a brand new build plate and nozzle but I have a suspicious none of that will work. Here is a timelapse of a random print I tried using Polylite PLA plus I think. Please I beg for something to fix this I love 3D Printing its such a useful thing. Thank You for any help !

This is a timelapse not actual speed.

I am at a complete loss at this point my printer was on a janky table I made myself and I finally got something sturdy to put it on so I put it on that figuring it would help print quality considering its sturdier. To my surprise not a single print has worked since. I didn't use my printer for maybe a month before the swap but before that it was working flawlessly. I have an Elegoo Neptune 4 Plus using Orca Slicer, and regular PLA all different kinds thinking maybe filament issues idk. I have tried cleaning the nozzle I have tried cleaning the build plate I've tried putting glue on the build plate I've tried leveling it automatically I've tried leveling it manually. nothing will work it just doesn't seem to stick to the build plate. the trial strip it does before the print sticks just fine and at one point the print was at some level sticking but maybe a minute in it would just fall apart. I have orca set to 0.4mm nozzle and I have a 0.4mm nozzle all settings for prints are default for my printer which has always worked before. At this point I'm honestly thinking I need a new printer because what else do I do. I can try buying a brand new build plate and nozzle but I have a suspicious none of that will work. Here is a timelapse of a random print I tried using Polylite PLA plus I think. Please I beg for something to fix this I love 3D Printing its such a useful thing. Thank You for any help !

This is a timelapse not actual speed.