u/Optic_Light

Hey all thanks for reading.

I have been in the process of fixing this washing machine, and I needed to remove the pump from the sump assembly. Problem was it was attached with pex rings.

My crimping tool is too small to reattach the large ring (1 1/2 inch pipe, bigger with rubber fitting) and too small to fit in the area to crimp the small ring (~1 inch pipe, also bigger with rubber fitting).

If any of you know how I can reattach this pump, either with a way I can tighten the rings or with another method of fastening, I would greatly appreciate to hear it.

Thanks again for reading.

Hey all thanks for reading.

I have been in the process of fixing this washing machine, and I needed to remove the pump from the sump assembly. Problem was it was attached with pex rings.

My crimping tool is too small to reattach the large ring (1 1/2 inch pipe, bigger with rubber fitting) and too small to fit in the area to crimp the small ring (~1 inch pipe, also bigger with rubber fitting).

If any of you know how I can reattach this pump, either with a way I can tighten the rings or with another method of fastening, I would greatly appreciate to hear it.

Thanks again for reading.