41.22 Kill Switch Install
**NOT AN AD**
I just installed the 41.22 Kill Switch into my 2025 CTR. It is by far the cheapest option on the market and the simplest(one of the reasons I bought it). I promised a couple people to make a post on this since its a nice kit and not a lot of people have installed it.
First things first you can remove the weird 3D printed box they supply with the kit. It's not needed at all, its just an empty box.
Next we're going to be installing this kit into the fuel pump relay circled in red. It is this nice blue color and the only one of its color. You will just need to grab the relay and wiggle it back and forth. You can pop the kits replacement relay into its spot the replacement relay only has 3 legs not 4 so don't worry.
The next thing we're going to do is install the ground included in the kit. I installed it at the light blue circled grounding point. This is also the main grounding point for the cars battery. I recommend disconnecting the negative terminal on the battery to not arc out the cable as you are pulling the bolt out.
Wire management. You can shove all of the connectors into the magenta circled area and route the wires out of the casing. Its a little bit of a finesse to get them to fit but that is the best spot to do it.
For the switch wire you can either take the battery out to gain access to the gromet in the firewall. Or you can use a fish tape to do it in reverse(I did it this way due to my strut brace). doing it from inside the cabin on the second picture the firewall gromet is circled in red. Once the cable is routed inside the cabin you can decide where you want to place the switch. I didn't include a picture of mine installed for obvious reasons.
Overall the kit is great for only being $108 USD shipped. Its 4x cheaper than the SES kit and 16x cheaper than a Compustar IGLA. For those of you going to say "You have a Expensive car you should be able to afford it" I get it but then again this solution works. It does exactly what I need at a very comfortable price point.
If you guys have any questions or need help please reach out. I am more than willing to help out if you need it!