Hi
I’m new to using wireless bridges and I cannot seem to get a camera online on my NVR.
I’m unsure if my wiring is correct or not but the way I have it configured my bridges seem to be connected and pairing to one another.
I’m using x2 Ruijie RG-EST100-E bridges and is wired as follows:
Base station side:
-12 V DC from outlet to POE injector
-Cat 6 from Hikvision NVR to LAN port of injector
-Cat 6 from poe port from injector to LAN 1/Poe of base station
Receiver (camera end)
-12 V DC from outlet to POE injector
-Cat 6 from POE port to LAN 1/POE on receiver
-Cat 6 from LAN 2 to ip camera
When I check on my NVR it just says that it’s detecting.
I will attach pictures of the ports on the bridges and the injectors to make imagining my set up easier.
Any advice would be greatly appreciated.