u/Golge_Kirmizi7463

C5/0d Error Code On X870E Tomahawk

I am writing regarding a critical issue with my MSI MAG X870E Tomahawk WiFi motherboard that started spontaneously overnight without any hardware changes or interference.

SYSTEM SPECS:

- Motherboard: MSI MAG X870E Tomahawk WiFi

- GPU: PNY GeForce RTX 5070 Ti

- PSU: MSI MAG A850GL PCIE5 850W

- RAM: 2x sticks (running single channel as workaround)

ISSUE DESCRIPTION:

The system started failing to boot with a 0D POST code (CPU initialization failure), fans spinning for 1 second then stopping, and no display output. This happened overnight with no hardware changes made.

STEPS ALREADY TAKEN:

- Cleared CMOS multiple times (both battery removal and rear I/O button)

- Reflashed BIOS twice using the Flash BIOS button with MSI.ROM on FAT32 USB

- Tested RAM individually in all slots — single stick in B2 temporarily resolved the issue

- System worked briefly then failed again overnight returning to 0D/C5 codes

- Reseated all power connectors

CURRENT BEHAVIOR:

- System intermittently shows 0D (CPU init failure) or C5 (memory training failure)

- Symptoms return after the system cools down overnight

- CMOS clear temporarily moves it from 0D to C5

- No display output at any point

- Both CPU and RAM diagnostic LEDs light up simultaneously

Given that the PSU is an MSI MAG A850GL which is more than sufficient for this build, and all software/firmware solutions have been exhausted, I believe there is a hardware defect with the motherboard. The intermittent nature and overnight failures without any interference strongly suggest a hardware fault.

reddit.com
u/Golge_Kirmizi7463 — 4 days ago

X870E Tomahawk WiFi - Persistent 0D/C5 POST Codes, No Display

I am writing regarding a critical issue with my MSI MAG X870E Tomahawk WiFi motherboard that started spontaneously overnight without any hardware changes or interference.

SYSTEM SPECS:

- Motherboard: MSI MAG X870E Tomahawk WiFi

- GPU: PNY GeForce RTX 5070 Ti

- PSU: MSI MAG A850GL PCIE5 850W

- RAM: 2x sticks (running single channel as workaround)

ISSUE DESCRIPTION:

The system started failing to boot with a 0D POST code (CPU initialization failure), fans spinning for 1 second then stopping, and no display output. This happened overnight with no hardware changes made.

STEPS ALREADY TAKEN:

- Cleared CMOS multiple times (both battery removal and rear I/O button)

- Reflashed BIOS twice using the Flash BIOS button with MSI.ROM on FAT32 USB

- Tested RAM individually in all slots — single stick in B2 temporarily resolved the issue

- System worked briefly then failed again overnight returning to 0D/C5 codes

- Reseated all power connectors

CURRENT BEHAVIOR:

- System intermittently shows 0D (CPU init failure) or C5 (memory training failure)

- Symptoms return after the system cools down overnight

- CMOS clear temporarily moves it from 0D to C5

- No display output at any point

- Both CPU and RAM diagnostic LEDs light up simultaneously

Given that the PSU is an MSI MAG A850GL which is more than sufficient for this build, and all software/firmware solutions have been exhausted, I believe there is a hardware defect with the motherboard. The intermittent nature and overnight failures without any interference strongly suggest a hardware fault.

u/Golge_Kirmizi7463 — 4 days ago
▲ 1 r/piano

I'm starting to play with two hands. I learned to play "Hit the Road Jack" from a YouTube tutorial. It was pretty hard, but I got the hang of it. Now I want to learn new songs and work on my left hand. I mostly prefer hip hop (Kanye West, Eazy E, etc.), so I recognize the rhythm and learn faster.

reddit.com
u/Golge_Kirmizi7463 — 7 days ago

C5 And Red And Yellow Lights on MSI X870E Tomahawk.

I'm getting red and yellow debug lights and an error code C5. The PC was working fine yesterday. I built it about 10 months ago. Today, I got a 0d error code when I woke up. I tried resetting the CMOS, but then it turned into C5. I don't have a display, but the fans and RGB are working fine. What's the reason it suddenly broke without any warning?

reddit.com
u/Golge_Kirmizi7463 — 7 days ago

I'm getting red and yellow debug lights and an error code C5. The PC was working fine yesterday. I built it about 10 months ago. Today, I got a 0d error code when I woke up. I tried resetting the CMOS, but then it turned into C5. I don't have a display, but the fans and RGB are working fine. What's the reason it suddenly broke without any warning?

reddit.com
u/Golge_Kirmizi7463 — 9 days ago

I just woke up and started my pc and it was like this. Fans start for 1 second and turn off, motherboard is msi x870e tomahawk wifi. Please help. Also the motherboard shows a weird error code like 0d

reddit.com
u/Golge_Kirmizi7463 — 9 days ago