▲ 1 r/FixMyPrint
Hi all !
I'm a recent owner of the Sovol SV08 (rooted with mainline Klipper).
I've done the calibration using OrcaSlicer calibration tests, but I'm still having one issue on my first few prints.
It seems that after bridging, and also after some sudden changes of directions, I have some under-extrusion.
Print settings :
- Printer : Sovol SV08 (with TriangleLabes CHCB Hotend)
- Slicer : OrcaSlicer
- Filament : JAYO HS PETG (Blue)
- Nozzle and bed temperature : 0.4 nozzle at 245°C / Bed at 80°C
- Print Speed : Outer Wall 200mm/s, max acceleration at 4500mm/S2
- Retraction : Distance 0.4, Z-Hop 0.4.
- Pressure advance (calibrated with PA Pattern) : 0.035
Any idea what might be causing this ?
Thanks in advance !
u/Flopi-Flop — 16 days ago