I finally got around to doing some proper measurements with Dirac Live. I'm running a NAD C3050 and Super Lintons. It's a roughly 10x10 room with a single seat for listening, but I opted for the 13 measurements as that seemed like the best option for imaging and soundstage. Before I took the adjustements I adjusted the left speaker trim down about 1db as it was reading 1db higher than the right with pink noise. I'm guessing the right was quieter due to side reflections as it is right by a large bookshelf. I ran all of the Harman curves 4db, 6db, and 8db. I have curves setup for the 6db and 8db both with and without the curtain set around 500hz. So far the best sounding to me is the 8db with 500hz curtain so Dirac is not messing with anything above 500hz. Any suggestions for my pictured readings? Would you move the curtain or adjust the curve at all? I'm still learning about all of this stuuf so any help would be appreciated!