Login

u/Enforced_Leo44

Image 1 — Need help with ABS overhangs
Image 2 — Need help with ABS overhangs
Image 3 — Need help with ABS overhangs
▲ 2 r/FixMyPrint+1 crossposts

Need help with ABS overhangs

Hi everyone,

I have an enclosed P1P, printing Overture ABS (dried at 70° for 7 hours), that’s having quite a hard time printing even very easy overhangs

Profile settings are 270° hotend, 100° bed, heat soaked chamber to around 45°, no aux fan and part fan at 25% to 40% for 30s and 10s layer time respectively. 60% fan for almost every degree of overhang

Any help would be massively appreciated. I’m currently printing another test cube with the default generic ABS profile to see if the problem is profile or hardware related.

u/Enforced_Leo44 — 4 days ago