u/BeqaKs

I have successfully installed the modchip. The chip consistently pulses and gives a successful glitch, landing me on the "No SD" screen. However, I cannot get the console to boot any further.

1. Stock Boot: Attempting to boot into stock firmware results in an immediate Blue Screen (BSOD).
2. Hekate Errors: When booting with an SD card (FAT32, fresh HATS/Atmosphere pack), I get "Missing LP0" and "Missing Minerva" errors.
3. Legacy Hekate: Older versions result in a black-and-white flashing screen.
4. Physical Condition: There are two minor surface scratches on the green solder mask over the RAM traces leading to the APU (copper is exposed but traces appear intact).

What I’ve Checked:

• Previous Shorts: I initially had a BSOD caused by the flex cable "tongue" shorting against the CPU shield, but I have since corrected and insulated this.
• Soldering: SP1 and SP2 appear to be nicely attached. The chip's white light suggests the glitch handshake is happening.
• Maintenance: I’ve cleaned the board with IPA and verified the eMMC daughterboard is fully seated.

Any More solutions?

https://preview.redd.it/zy72hetrs20h1.jpg?width=1980&format=pjpg&auto=webp&s=ba8df0576bdf29a6baee9ab76690d43a8f1f00bb

https://preview.redd.it/sltl5ctrs20h1.png?width=1179&format=png&auto=webp&s=f9434370e1b841e0015e2792ad8affa6a2ecd238