Hi Guys, I've got my coilovers installed in a shop recently and after I've done some measurements I've noticed that the ride height is uneven on the sides.
The left is around 1cm lower on the back and also a little bit on the front, but not that much.
I measured the thread on the coilovers and it turns out that my rear left coilover is set ~5mm shorter that the right one. Considering that left is the driver's side in my case, it goes even lower during driving..
How normal is this amount of tilt on the side?
The problem is I'm based in Germany, where you have to register your suspension settings and I get my current nuts positions marked with some paint during registration. So I'm afraid that adjusting the height would lead me to another round of registration (even though the actual ride height does not match the one in the registration certificate)..
UPD. Ride height measured at the pinch welds on a concrete floor:
LR/RR 105mm/111mm
LF/RF 101mm/104mm