Failed Print. New to 3D Printing
I have successfully printed other models before, but this time I changed some settings. Changed layer height to 0.030 mm from 0.050 mm. Reduced exposure time to 2.2s and added rest time after retract to 1s. I also turned on Anti-aliasing Level and set it to 2. I read it helps with model detail. I decided to try it out to test it. Satrun 4k Ultra printer. ELEGOO 8K ABS-Like 3D Printer Resin Space Grey. Is the problem in the settings or possibly the temperature? I am not sure what the temperature was, but i can guarantee it was not below 18C and I'm quite confident that it was actually above 20C, but im not sure. It is in a dark space no way to get direct sunlight as it is underground with no windows, and had a small LED light near, so I can record and view the camera during the printing process as there is 0 light when i turn the main room lights off..