u/AlexZap_

Hi everyone,

I’m relatively new to 3D printing and have been struggling with some persistent artifacts on my prints. I’ve already did the entire calibration workflow outlined in the OrcaSlicer wiki, but the issues remain exactly as they were before.

I’ve added a few photos of a recent print to show what I’m dealing with (not talking about the stringing). Printed with 0,2mm layer height (standard orcaslicer profile) at 60% of maximum speed.

• Printer: Flashforge 5M
• PA: 0,046
• Nozzle: 0,4mm
• Material: PETG Sunlu Black Dried at 60 °C for ~4h
• Nozzle Temp: 250 °C
• Textured PEI plate Temp: 75 °C
• Max VOlumetric Speed: 26 mm^3/s
• Outer wall: 200 mm/s 5000mm/s^2
• Inner wall: 300 mm/s 5000mm/s^2

I'm using OrcaSlicer 2.3.2

Thanks in advance for the help!

EDIT: Added Print Speed and photos