▲ 7 r/m365
I Bought a new esc for my m365 yesterday, it arrived today and its a v3.5? What is this controller? Can i do 20s mod on this?
u/braskiet — 8 days ago
r/m365
▲ 4 r/m365
Hi family, hope we are all good.
Happy owner of an m365 pro, the first one. Modified on day one (cant remember the name) but basically the 20mph mod etc. Will get the deets later.
Has been flawless until last week when I was riding up the hill to my house with the battery at around 50% when it started surging and cutting out constantly.
No erros on the dash.
Checked all the battery cells in 365 tools and had one highlighted in red but it seemed only very slight at 4.090v
Scooter back to full form when charged again but I know it will do the same thing again when it is put under load and the battery is around 50%
Thoughts or advice?
J
u/Jinjur — 10 days ago
▲ 2 r/m365
Sry for brevity im on phone
The wheel can move semi independently from the steering as shown in video. (Im holding steering in place but still turning the wheel). Somewhere, some part below the handlebar stem isnt gripping properly for some reason
I tried removing the wheel to fasten the bolt at the base of the front fork (the one that faces upwards into the fork) but the problem persists.
Im thinking of just ordering a new fork and hoping for the best, but maybe one of u is familiar with this?
Im not very technical with mechanical knowledge/skills, try to give layman explanations 🙏🏻
Also yea the wheels r my next project dont worry 😅
u/Sascop — 9 days ago
▲ 2 r/m365
My original Pro 2 chassis broke in two at the solder joint of the base due to heavy use for over 3.5 years, so I bought 2 incomplete Xiaomi Pro 2 scooters (AMG edition) for cheap, because the replacement battery I bought almost 2 years ago with double amperage is still (somehow) working at 100% capacity.
I completed one of the AMG chassis by transplanting pieces from my original Pro 2. The second AMG is missing a few pieces that I already ordered from Aliexpress, but I can't find the plastic covers from the front and sides of the chassis, as shown in the photo.
The only few results I managed to find on Google for the front piece was using "Xiaomi scooter Pro front bumper Strip", but I can't find nothing for the 2 side pieces on the back. USA stores are out of question due to tariffs and high postage/import taxes, I would prefer European and/or Aliexpress type stores.
If there was a pre-made 3D print file for these pieces I could print them myself, because I don't know how to design them from scratch.
u/JohnyeBravo — 6 days ago
▲ 1 r/m365
Mi SCooter malfunctioned
Hi,
I have mi 1s and it started behaving ghostly after i drove it in rain. I suspect the ble has gone bad. The On OFF button doesnot works sometimes it auto turns on and off.
I found a m365pro dashboard on TEMU , will it work on My Scooter Xiaomi mi 1s
Thanks
u/Thick_Internal8055 — 10 hours ago