I have a Lenel 2210 panel with a connected reader. A 1300 module has been added and connected to the panel via the communication port.
The wiring is as follows:
From the 2210 panel: (Data / Clock / GND)
To the 1300 module: (TR+ / TR- / GND)
The DIP switches on the 1300 module are set with all switches OFF except 6 and 7 (configured as required).
When adding the reader in the system, the address is set to 0 for both the panel and the reader, but the reader remains offline and does not communicate.
Is there any additional configuration or missing step in the wiring or settings that could be causing this issue?
u/mishalmay — 8 days ago