I need an upper and lower drive belt for my 2011 Troy Bilt Bronco. I have the lower sorted out, but I don’t know what upper belt to get. The two options google gives me are two different lengths: 954-0468 is 41 1/2 inches long and .656 inch thick at the top whereas 954-04208A is 40 inches and 40.9 inches by .656 thick. Which upper belt do I get?
Used it 4 days ago with no problem. Today it cranked and started fine but shut off after about 20 seconds. I kept trying to get it started. And it would turn for a few second but white smoke kept getting heavier. Now leaking oil and perhaps some fuel from the fuel pump (?), and not turning. New battery, fuel tank full. Any advise is very welcome.
I appreciate the advice and comments on my previous post. After a rough start that subsequently lead to a good deal of oil dripping from the exhaust. I noticed the air intake was flooded with fuel. Pumped the excess fuel out, took out spark plugs, there was minimal oil in one of the the other was as I would expect it. After putting the plugs back, It cranked right away, some white smoke but stayed running at idle…until I increased the throttle. You can see in the video the air intake get flooded right away. I appreciate any advice on fixing this without breaking the bank please.