EAP 211 Client No Internet
First - I am not an IT professional, just a home user.
I have a two small wifi networks at my home. One in my primary residence and one in an accessory building about 200ft from my primary.
Primary has ATT Fiber, Deco Mesh Wifi, TP Link TL-SG1005P switch and Omada EAP211 Main bridge.
Accessory building as Omada EAP211 Client, TP Link TL-SG1005 switch and Netgear Nighthawk Mesh Wifi
Issue I am having is this: I setup the EAP211 Bridge with a temporary network cable. All worked great, plug and play setup and connected no problem. Worked that way for about 5 days until I had time to run the permanent network cable (outdoor rated).
After this, no internet on client side.
I have done the following troubleshooting:
switched back to temporary network cable that worked
tested all cables with cable tester (all test functional)
connected to Omada App and can see Main and Client connected
confirmed Main is transmitting (can connect and access internet)
on Client side, switched between POE switch and POE injector and no difference
connected computer directly to Client AP and no internet
Really at my wits end and could use some help from the community
Lastly, I did contact Omada Tech Support and they helped me and ran a test in their lab and sent me steps to complete, I completed those, but still no internet on the Client side. They are slow to respond, so I may not hear back from them for some time. Tech was really helpful though