Engagement Ring/Wedding Band CAD Check
Provided them with the following specs. Any issues with the attached CAD outside the thickness being off. Any and all feedback/suggestions are appreciated.
Engagement Ring
* Center Stone: 3.55 ct Round Brilliant (Color: D)
* Setting Style: Six-prong solitaire with pavé band
* Metal: Platinum
* Prong Style: Petite claw (slightly softened claw tips, not needle sharp)
* Prong Count: 6
* Band Width: 2.3 mm
* Band Thickness: 2.0 mm
* Pavé Style: U-cut pavé
* Pavé Stone Size: 1.3–1.5 mm
* Pavé Stone Color: E–F
* Pavé Stone Clarity: VS1–VS2
* Pavé Coverage: 1/2 eternity
* Gallery: Open gallery
* Basket: Low to medium height (Note: Jeweler must ensure "Pointed Culet" is suspended and protected)
* Shank: Comfort fit interior
* Structural Note: Slightly thicker base under pavé for girdle protection and structural support.
Wedding Band
* Metal: Platinum (Match engagement ring)
* Band Width: 2.0–2.1 mm (Proportional to 2.3 mm engagement shank)
* Band Thickness: 1.8–1.9 mm (Maintains slightly lower profile than engagement ring)
* Pavé Style: U-cut pavé (Exact match to engagement ring)
* Pavé Stone Size: 1.1–1.3 mm (Creates subtle visual hierarchy)
* Pavé Stone Color: E–F (Match engagement ring pavé)
* Pavé Stone Clarity: VS1–VS2
* Profile: Comfort fit
* Coverage: 1/2 eternity
* Bottom Section: Plain metal centered for durability/sizing
* Fit: Flush or minimal gap (0.1–0.2 mm clearance max)
Notes for the Jeweler:
Culet Clearance: The center stone has a "pointed" culet; the basket must be engineered so the point does not contact the finger or the base of the setting.
Color Harmony: Because the center stone is a D, please ensure all pavé stones are strictly in the E–F range to avoid any visual "warmth" contrast.
Stability: Ensure the 2.3 mm width transitions smoothly into the head to support the 9.7 mm+ diameter of the center stone.
