RAk 4631 dead?
Need some other brains on this that know more about the tech than I do. So I set up a 4631 as a repeater about a month ago and a couple of tbeam 's as companions after it. The 4631 has been unplugged and plugged back in a few times in the process of flashing and putting it in a case and such but today I unplugged it to do some cable management, when I plugged it back in,it didn't come back. No insanely bright red led. The antennae were both plugged in at all times, nothing physically happened to it, but it didn't come back.
I plugged it into my computer and it shows up in dfu mode as a drive but does not allow itself to be flashed with firmware from the meshcore flasher, just timed out about 3/4 the way through. It does allow itself to be reflashed with downloaded firmware using terminal though but it still won't come back. I tried different known good cables, different firmware versions, nada. Is it dead? Also is this common cuz I've only had it for a month, it's not sustainable to keep buying these for $60 if that is a known issue.
Any help would be appreciated.