Any help appreciated
Wanted some input from fellow enthusiasta on my 10 1/2 inch PSA 15 with DNT super safety and the issues I’m having.
I’m having no issues with sticking or where the bolt is catching. It functions as should and resets the trigger in hammer upon the BCG going back and forth; but I keep getting what I think is bolt bounce as I started having issues with a dead trigger with a live round in the chamber, with a slight dimpling, indicating that the firing pin has slid into it due to inertia.
I have a grey market research H3 buffer I bought an additional weight that is external that goes in between the BCG and buffer weight from the same company to see if the heavier weight will solve the issue.
If that does not solve what’s going I will test H1 all the way to H3 with the additional weight, but was wondering if I have a bad HD buffer weight and should get one from SLR or Tromix?
Any help would be appreciated ( for an additional note it ran flawless with drop in kabuto + the H3 buffer for around 150 rounds then was having the same issue I am describing)