Just Got My MAX 4 With the polar cooler and the Qidi Box
Aloha,
so I just got my MAX 4..... came from a Plus 4, and figured it would be too bad of a change. I was wrong. I'm scrambling to find solutions.
1st problem: I was using Qidi Slicer insted of Qidi Studio.... sooo now I'm having to learn about all of that
2nd problem: I don't know where to adjust the print head tempurature at, but I found that if I put in the desired temperature before I slice my model, then it'll print at that tempurature.
3rd problem: Qidi box.... we are going to war me and that box... it won't load, doesn't stop when hitting the hub, and never makes it to the extruder.
I did disconnect the PTFE tube and just let it run until I had more than enough material to feed into the head and do a test purge... but then it stopped and wouldn't feed nor extract. (ended up manually doing it).
4th problem: My attampted prints are super slow, and coming out looking horrible. I just came across to change the setting for volumetric speet from 20 to 10 m/s so will try that shortly
5th problem: I am unable to find where I can do an auto bed leveling at bed temp before sending my print to the Max4.
I already managed to break the hub, (have a new one on order). I've done the firmware update, I've had to factory reset 6 times already as it got stuck in the centering/homing program, and a few varuoius other items due to something with the Qidi Box.
Any help or tips would be greatly appreciated.