u/Nisko-

Up for sale a Kikumori Yoshikazu Tanaka Gokujyo Shirogami #2 gyuto 270mm

A knife that covers its substantiality quite great its not a small knife dont get me wrong, but its a pleasure to work with, feels quite nimble and fast. I dont keep my knives in the drawer so when i ran out of space on the magnet one needs to go.

257mm x 53mm, 194gr

Fit and finish is really great, super straight attached handle, edge and spine straight,

has beautifully chamfered spine and mirror polished choil (resembles Myojin)

Has been sharpened once with shapton glass 1000k-6000k and stropped a few times.

Has not really seen a lot of usage, a couple of dinners and a cabbage.

Willing to ship worldwide - i can take two different payments to help with tariffs for US.

Purchased from strata portland for way north of 400€ (with imports)

and im asking for €300 PayPal G&S (or €290 via PayPal F&F / Wise / Revolut).

I can offer DHL express for 20€ throughout Europe and 25€ CONUS.

Up for a sale a recently grabbed Shindo Petty, since they are so hyped i wanted to give it a try, performance wise its unbelievably good, just the finish is not for me.

140mm x 34mm and 71g

Lacquer still on the blade, I've cut 1/2 chicken breast, a carrot and a paper towel.
Factory edge, never sharpened, never stropped.

Has really nice S grind to it, super super thin behind the edge, fit and finish is great spine and edge are straight.

First owner, bought at knivesworld for 67€ asking for 84€ PayPal-GS (or 80€ via PayPal F&F / Wise / Revolut)

+ Shipping, I can offer DHL express for 20€ throughout Europe and 25€ CONUS. 

Up for a sale a recently grabbed Shindo Bunka, since they are so hyped i wanted to give it a try, performance wise its unbelievably good, just the finish is not for me.

171mm x 47mm and 126g

Lacquer still on the blade, cut 1 chicken breast, a carrot and a paper towel. 
Factory edge, never sharpened, never stropped.

Has really nice S grind to it, super super thin behind the edge, fit and finish is great spine and edge are straight.

First owner, bought at knivesworld for 98€ asking for 120€ PayPal-GS (or 115€ via PayPal F&F / Wise / Revolut)

+ Shipping, I can offer DHL express for 20€ throughout Europe and 25€ CONUS. 

Up for a sale a bundle of handles i wont use. 

From left to right, they are all new, never attached. Measurements are approx. 

Handles are made of natural maple wood. It undergoes a special procedure of stabilisation with resin, which ensures a very long service life of the handle. During this process of stabilisation, a colour pigment is added and is then absorbed in the wood fibers. After the final treatment and polishing, the handle reveals the grain of the wood.

1. Small Length: 115mm (4.5") - Tang opening: 10.9 x 2.3mm (0.43" x 0.09") 39g
2. Small Length: 115mm (4.5") - Tang opening: 10.9 x 2.3mm (0.43" x 0.09") 38g
3. Medium Length: 128mm (5.0") - Tang opening: 13 x 2.4mm (0.51" x 0.09”) 57g
4. Medium Length: 128mm (5.0") - Tang opening: 13 x 2.4mm (0.51" x 0.09") 57g
5. Large Length: 140mm (5.5") - Tang opening: 13.1 x 2.4mm (0.52" x 0.09") 60g

Full retail price 265€, bought them on garage sale of SharpEdge shop for 25€.

Would like to sell whole bundle asking for 105€ (or 100€ via PayPal F&F / Wise / Revolut)

Would like to sell whole bundle asking for 89€ (or 85€ via PayPal F&F / Wise / Revolut)

+ Shipping, I can offer DHL express for 20€ throughout  Europe and 25€ CONUS. 

Up for a sale a bundle of handles i wont use. 

From left to right, they are all new, never attached. Measurements are approx. 

Handles are made of natural maple wood. It undergoes a special procedure of stabilisation with resin, which ensures a very long service life of the handle. During this process of stabilisation, a colour pigment is added and is then absorbed in the wood fibers. After the final treatment and polishing, the handle reveals the grain of the wood.

1. Small Length: 115mm (4.5") - Tang opening: 10.9 x 2.3mm (0.43" x 0.09") 39g
2. Small Length: 115mm (4.5") - Tang opening: 10.9 x 2.3mm (0.43" x 0.09") 38g
3. Medium Length: 128mm (5.0") - Tang opening: 13 x 2.4mm (0.51" x 0.09”) 57g
4. Medium Length: 128mm (5.0") - Tang opening: 13 x 2.4mm (0.51" x 0.09") 57g
5. Large Length: 140mm (5.5") - Tang opening: 13.1 x 2.4mm (0.52" x 0.09") 60g

Full retail price 265€, bought them on sale with 50% off.

Would like to sell whole bundle asking for 130€ (or 125€ via PayPal F&F / Wise / Revolut)

+ Shipping, I can offer DHL express for 20€ throughout  Europe and 25€ CONUS. 

Hey TCKBST

Baba Hamono Kagekiyo Gokujyo Tanaka x Wakae Shirogami #2 gyuto 210mm

This is supposed to be sharpened by Yuki Wakae and i like this grind much better than the Max's.

198mm x 46,5mm, 117g

Handle is Cherry.

Used for 1 dinner, home cook.
Factory edge, never sharpened only stropped on loaded leather.

This is a true laser, it cuts unbelievable, food release is not bad either!

Condition: flawless - fit and finish is superb.

First owner, bought in store.

Willing to ship worldwide - I can take two different payments to help with tariffs for US.

I can offer CONUS DHL express shipping for $20!

Purchased for 310€ and im asking for €320 PayPal G&S (or €310 via PayPal F&F / Wise / Revolut).

Enjiki Yamatsuka x Maruyama Ginsan Gyuto 240mm

230mm x 49mm, 175g

Handle is Japanese oak.

Used for 2 dinners, home cook.
Factory edge, never sharpened only stropped on loaded leather.

One of the best food releases i have experienced and totally non stick : )

Great performer! Excellent fit & finish.

Really hard to get in Europe, was originally purchased by first owner in Japan and I am the second owner. Bought BNIB.

Willing to ship worldwide - i can take two different payments to help with tariffs for US.

Purchased for 300€ and i asking for €310 PayPal G&S (or €300 via PayPal F&F / Wise / Revolut).

Satoshi Nakagawa x Naohito Myojin Aogami #1 Santoku 180mm

170mm x 47.7mm, 150g

Sandalwood and white horn ferrule.

Used for a few home dinners only.
Factory edge, never sharpened only stropped on leather.

Condition: flawless — excellent fit & finish.

First owner, purchased in-store for full retail at €580.
No box as it was blade only and handle was attached in shop.

I had quite a few knives and to this date this one still remains as my best cutting performer, nothing comes close. Myojin at its best.

Willing to ship worldwide - i can take two different payments to help with tariffs.

Asking for €420 PayPal G&S (or €405 via PayPal F&F / Wise / Revolut).

Up for a trade: Satoshi Nakagawa x Naohito Myojin Aogami #1 Santoku 180mm

170mm x 47.7mm, 150g

Sandalwood and white horn ferrule.

Used for a few home dinners only.
Factory edge, never sharpened only stropped on leather.

Condition: flawless — excellent fit & finish.

First owner, purchased in-store for full retail at €580.
No box as it was blade only and handle was attached in shop.

I had quite a few knives and to this date this one still remains as my best cutting performer, nothing comes close. Myojin at its best.

For higher-end pieces, I’m happy to add cash on top (€€€).

If no trade comes through, I may consider selling.

Open to different trade offers, but I’m mainly looking for:

• Gyuto (ideally 240mm, but 210 or 270 could work)
• Carbon steel or Ginsan
• Known sharpener is a must!
• Preferably Tetsujin, Konosuke, Takada, Wakui, Toyama etc,.

Feel free to shoot me any offers or ideas.

Looking forward! Thanks.

Up for a trade: Satoshi Nakagawa x Naohito Myojin Aogami #1 Santoku 180mm

170mm x 47.7mm, 150g

Sandalwood and white horn ferrule.

Used for a few home dinners only.
Factory edge, never sharpened only stropped on leather.

Condition: flawless — excellent fit & finish.

First owner, purchased in-store for full retail at €580.
No box as it was blade only and handle was attached in shop.

I had quite a few knives and to this date this one still remains as my best cutting performer, nothing comes close. Myojin at its best.

For higher-end pieces, I’m happy to add cash on top (€€€).

If no trade comes through, I may consider selling.

Open to different trade offers, but I’m mainly looking for:

• Gyuto (ideally 240mm, but 210 or 270 could work)
• Carbon steel or Ginsan
• Known sharpener is a must!
• Preferably Tetsujin, Konosuke, Takada, Wakui, Toyama etc,.

Feel free to shoot me any offers or ideas.

Looking forward! Thanks.