u/Milos_moo

Hi all,

What is the best way to control the car direction from image to video? Currently cars move in all directions, not as per image showing cars.

I tried specifying cars to: 'Traffic follows Australian left-side driving rules, with headlights and taillights stretching into long red and white light trails.' but it doesn't work as planned.

I tried creating a reference image with red arrows directing traffic and stating that red arrows to be removed and not in final output but it still places arrows in final output and cars are stil moving in opposite direction.

Can Seedance do proper traffic? or is it my prompts that need improvement? I spent a lot of credits trying different things without any success. Any help is appreciated.

Hi all, if you know the length of the building and you have the external GS. how do you reliably/accurately scale it to proper length. Other 3d programs allow two-point method and enter length value. Does something similar exist?

Hi smart people,

Hindsight is always amazing. Looking for your expertise and help in the best way to deal with this since upgrading to a 15 KW inverter now would cost 3.5k.

Recently had a three-phase battery system installed (10 kW inverter, 3.33 kW per phase). Whenever I switch to EPS (backup) mode, it instantly overloads because my worst phase draws around 4.5 kW (I think because of AC, multiple fridges). The installer suggests just turning off EPS and only using the battery for charging from the grid, but even then I could never depend on battery power during peak time as and extra above 3.3kw would draw from grid, right? Is there a cheaper fix? Can I load balance the PowerPoints circuit and transfer to another phase etc? Works that be cheaper than new inverter? Any advice appreciated.