u/MFire28

Hi everyone,

I recently bought a second-hand ROG Flow X13 (GV301RE), but I discovered that the internal metal bracket (support) for the power button is completely missing. Because of this, the power button is loose, doesn't click, and can't reach the microswitch on the board.

Since this part is almost impossible to find in my country, I’m planning to 3D print or fabricate a replacement.

Could someone who has their X13 open please provide the dimensions for this bracket (see the attached image)? Specifically, I need:

https://preview.redd.it/nho6s9an6i0h1.png?width=475&format=png&auto=webp&s=1d6acf713eebbd26fe5109a70c1197de35199395

1. Total Length: From hook to hook.
2. Bracket Depth: How deep the "bridge" sits.
3. Actuator Nub Height: The length of the small center "pimple" that presses the switch.
4. Thickness: Approximate thickness of the metal/plastic part.

A photo of the part next to a caliper or ruler would be a massive lifesaver!

Thanks a lot for any help!