u/LucienBraquemard

The bike is a Genesis Croix de Fer 30 2026, with internal cable routing. This part is used to route the cables through the frame. It screws into the frame.

https://preview.redd.it/hqqxz66wj41h1.jpg?width=1536&format=pjpg&auto=webp&s=ac1331dfc339f2271d96369c2b248c0357564610

There are two versions of this part: one for a single cable and another for two cables.

I would like to find the part number, specifically the two-hole version to replace two single-hole parts and route an additional cable through the frame.

Do you know where I could order this part?

I haven't found anything in online stores.

Another question: is it possible to make a copy with a 3D printer? The part is simply a finishing touch and doesn't have a mechanical function.

Alternatively, is it a problem to remove these parts to route two cables directly through the frame?

Hi,

I'm thinking of a Genesis Croix de Fer as a do-it-all bike.

Therefore, I'd like to install a dynamo-powered lighting system. Starting with the 2025 model year, the steel and carbon forks of the Croix de Fer are equipped with a cable routing system to connect the dynamo to the front light.

But what about the rear light? How can I internally route the wire from the front light to the rear light?

Do you have any suggestions?