u/Logical_Carrot267

https://preview.redd.it/eob60zpp4ewg1.jpg?width=1241&format=pjpg&auto=webp&s=1df71cb3ccba3f84406a9e184a757ba122358200

Hope I don't getting any trouble for this, but I don't like the discussion which Mesh I have to use, which is better, etc., I like all those three ones, so I made a multi receiver.

Actually this are just 3 Heltec Lora V3, 2x 868 MHz for Meshtastic and others and 1x 433MHz for a Mesh with another frequency. I used it a few days and the was no interference between those three ones, so I think it works :-) Powered is the hole thing with a 1S, 3.7V LiPo with 1100mAh and a little USB-C charging board.

If you are interested I put it on Thingiverse there you find the Iinfo's what you need. https://www.thingiverse.com/thing:7338939

https://preview.redd.it/m3gpbof64ewg1.jpg?width=1241&format=pjpg&auto=webp&s=e7fe96c09763fb9118b33820921e8c9624eed701

Hope I don't getting any trouble for this, but I don't like the discussion which Mesh I have to use, which is better, etc., I like all those three ones, so I made a multi receiver.

Actually this are just 3 Heltec Lora V3, 2x 868 MHz for Meshtastic and Meshcore and 1x 433MHz for Meshcom. I used it a few days and the was no interference between those three ones, so I think it works :-) Powered is the hole thing with a 1S, 3.7V LiPo with 1100mAh and a little USB-C charging board.

If you are interested I put it on Thingiverse there you find the Iinfo's what you need. https://www.thingiverse.com/thing:7338939