I recently bought the Landroid WR303E Cloud Vision, did a manual map around the edge (I even drove literally on the edge with one wheel) and the mower just won't cut that edge. I have cut-to-zero installed and for some reason, there are some edges where it will go 10cm (or more) away from them for no reason.
I did the edge routine and it did go around the edge, but it just never seems to go where I originally mapped it.
Here's the latest cutting map:
It's clearly visible on the map, where darker green represents the path that mower took to cut the edge and more than half of it is not on the edge.
The red circle is this area:
This couldn't be cleaner area for it to cut, but for some reason it just takes such a big turn, it misses around 10 (sometimes 20) centimeters of that edge.
This is the yellow area:
Same here, it drives somewhere around 10cm away from the edge, even tho during mapping, I had one wheel almost on the stones (it was on that slab/edge).
I found a few posts on the internet, saying that I should enable something called "Cut over border" but I can't seem to find this feature. It should be in some Multi-Zone menu in the app, but I don't have that button anywhere and I only have one zone anyway.
How do I force it to go closer to the edge?
Note that near the charging station, there is quite a similar edge and for some reason, the mower has no problem with that edge and goes exactly where I originally mapped it.
I tried to re-map the yard 3 times and 3 times the same result.