Need help / advice
The problem: I recently upgraded from a 300Mbps to a 500Mbps plan.
Before the upgrade, all 3 decos are upstairs. (M5 main, E4R & another M5 as satellits). Upstairs I get about 250Mbps, downstairs I get around 170-190Mbps. Not bad, (24-32% drop).
After the upgrade, at the main deco room I get the full 500Mbps. When I connect to the other decos, I only get around 170-190Mbps still (>60% drop).
What I've tried:
The more deco, the better approach. X50 as main, 1 E4R and 2 M5s as satellites. Plugged them all in. 1 wall apart. 1 M5 downstairs about 2-3 meters away from one satellite. Same result
Less is more. Main deco and 1 satellite deco (tried both models) still doesn't work
Mix & match. Originally I had the M5 as my main, and E4R and M5 as satellites. Purchased an X50 hoping this will transmit better signal to the rest. Both set ups (M5 main + satellites, and X50 main + satellites) same result. Full speed at the room of main deco, 60% drop to satellite decos.
I haven't tried M5 as main and X50 as satellite.
Deco settings I tried:
Router Mode - Did the QoS and matched it to my supposed speed.
Acces Point Mode - This was my previous set up before the upgrade. Worked fine, or so I thought. Am I doing something wrong?
Current settings
Router Mode with QoS at 500Mbos. 2.4Ghz & 5Ghz enabled.
History: I have the M5s and E4R for a couple of years now, and used it previously with a 500Mbps plan at a different place. I used to get 300Mbps from the farthest satellite. One deco every wall (Living Room / Hallway / Bedroom). So I don't know why it's not doing the same thing, am I missing anything?