Hey guys I got this 2017 2800bh last year and just noticed the wall near the slide has separated from the floor. Is this fixable or something I can manage from home? I imagine some lag bolts through the aluminum stud and frame with a steel plate underneath might work but how can I get access to the framing without completely destroying the camper?
I got this camper last year with the upper bunk removed. Does anyone have any pictures of the support frame for the upper bunk? I'm gonna try and remake it some how
I think the previous owner cut the underbelly shorter on the one side where the frame is reinforced for the suspension. What's the best way to seal this? Should I tekscrew a piece of metal onto the frame and then tekscrew the belly pan to it or should I just fill the gap with spray foam or would rv underbelly tape hold it to the metal?
Has anyone had the belly pan off before and had a good look at the plumbing drains? I got my camper last year and the grey water was hacked together and exposed below the belly pan with a low spot that cracks every winter. Chatgpt said the stock system uses cable actuated drains. I've currently tied the 2 grey water tanks together and placed a cable drain behind them but they look like they are already slightly below where the belly pan would be. Does the stock system use drains like the first pic or am I correct in my new approach? Currently first tank goes directly toward the second tank where it goes together with a y and a 45 then right past the tank I have the cable gate. For the black water I was going to locate the cable gate directly against the tank opening. Is it worth this effort or is should I just use the manual drains as they are already set up? I don't really camp in winter and I'm mainly just trying to fix the low spot that cracks which is already addressed