So my projector BenQ W1070+ has it's lamp led red when I start it, then turns off on itself.
I made sure that every single cable was connected and that the lamp door pressure safety switch was pressed when putting the cover but it still wouldn't turn on.
So i'm wondering if it may be because of the color wheel cable that I accidentally scrached while trying to reconnect it.
what do you think ?
I saw a video that showed a benq projector where there was a little metal safety switch that needed to be pressed to turn the lamp on but I can't seem to find it. My projector has it's lamp led red
Update from my precedent post.
For the context, I wanted to clean the DLP chip because there was some dust showing when it was dark scenes
I disassembled it, cleaned the DLP chip then reassembled it .
When I turned it on, it would start, then the lamp led would turn red then the projector would turn off on itself. I disassembled it multiples times but still the same result (it starts, then the lamp led turns red then the projector turns off on it's own.
I don't know what to do, I made sure that every single cable was connected and that every screw was solidly put in place.
What I don't understand is that it worked perfectly well before that, so I must have done something that caused this trouble but I don't know what it could be
Update from my precedent post :
For the context, I wanted to clean the DLP chip because there was some dust showing when it was dark scenes
I dissasembled it, cleaned the DLP chip then reassembled it .
When I turned it on, it would start, then the lamp led would turn red then the projector would turn off on itself. I dissasembled it multiples times but still the same result (it starts, then the lamp led turns red then the projector turns off on it's own.
I don't know what to do, I made sure that every single cable was connected and that every screw was solidly put in place.
What I don't understand is that it worked perfectly well before that, so I must have done something that caused this trouble but I don't know what it could be
Hey guys, I bought a used BenQ W1070+ recently and it worked really well but there was dust particles on the DLP chip that was visible when it was dark scenes so I disassembled it to clean the DLP chip, the mirrors and the colour wheel.
When I reassembled it, the projector started but the lamp led would turn red and then shut down.
What could be the reason for it ?
I do have an hypothesis : when I reassembled it, I accidentally scrached the colour wheel sensor flex cable's gold tops so maybe it can't conduct well.
But maybe it's something else.
What should I do ?