Is my 1KW BLDC motor compatible with this LKBL22010 driver?
I'm working on converting my Sieg SX3 to CNC, and really want to be able to reuse the existing 1KW BLDC motor without retaining any of the original electronics.
I've found this 1kw BLDC driver on aliexpress, that I believe should be plug and play and compatible with mach3, but before I go out and buy it I'd really appreciate if someone could help me confirm this is correct, especially because I've never really seen anyone talk about this option (people either retain original electronics or just swap out the motor entirely).
It is my belief that the following line up between the motor and driver:
CN1 Pin 1 | HGND | S- (Black)
CN1 Pin 2 | HA | SA (Yellow)
CN1 Pin 3 | HB | SB (Orange)
CN1 Pin 4 | HC | SC (Brown)
CN1 Pin 5 | HVCC (+5V) | S+ (Red)
and that from here connecting the driver to mach 3 would be through a simple PWM signal .
Thank you in advance!
