u/Dry-Slip4787

import board, time, digitalio
from adafruit_debouncer import Debouncer
button_output = digitalio.DigitalInOut(board.GND)
button_input1 = digitalio.DigitalInOut(pin.FC)
button_input2 = digitalio.DigitalInOut(pin.FG)
button_input3 = digitalio.DigitalInOut(pin.AC)
button_input4 = digitalio.DigitalInOut(pin.AG)
button_input.switch_to_input(pull=digitalio.Pull.UP)
button1 = Debouncer(button_input1)#power
button2 = Debouncer(button_input2)#controller
button3 = Debouncer(button_input3)#volume up
button4 = Debouncer(button_input4)#volume down
bluetooth =
controller =
volume up =
volume down =
while True:
    button1.update()
    if button.fell:
        if bluetooth.get_busy():
            bluetooth.on()
            print("power on")
        else:
            bluetooth.off()
            print("power off")

while True:
    button2.update()

while True:
    button3.update()

while True:
    button4.update()

its going on a raspberry pi rp-2040 btw