u/ChrisGalazzo

I installed new led tail lights on my truck

They both worked complete drivers side and passenger .

I went through a car wash with the under body flush, then noticed my passenger side not working

I tried giving power directly to the brown wire VIA the liscense plate lights with no luck.

Yesterday; I connected my 7 way plug from my 5th wheel camper into the plug that is in my bed on the passenger side.

When wiggling the plug, the drivers side tail light turned itself on again. When I unplugged it then put it back in it is now off again as it was before

Mind you, the brake lights and reverse lights still work, just the running lights don’t

The running lights weren’t working on my camper , brake lights were. My brake controller also lit up as it was connected , it would turn red when I hit the brakes , but manually squeezing on it didn’t do me any good in stopping the trailer.

I am planning on replacing a ~2x8 piece of roof sheathing on my camper. The sealant on the edge where it meets the gutter has failed causing a leak/soft spot.

When gluing the rubber roofing back onto the fresh plywood - I am seeing Dicor 901BA-1 as the reccomended adhesive.

Has anyone found any alternatives available at the big box stores? (Home Depot, Lowe’s ETC.)

What have you used that has held up? In urgent need of reccomendations! Thank you