I got my control arms that I made in and boy howdy are they ridiculous in a good way and 1 bad way. Super adjustable. But..... being built using offroad/crawler joints, the 1in uniballs to be specific. The fact that they are rebuildable and not press fit means they have a very minor bit of play in them. The fact that they have a c clip that sits just a bit above the joint means the joint can move a little in the housing. I emailed the company and they said this is normal and they will survive being rattled around in the "cup". Well being the rear vertical bushing location this results in a hell of a rattle. Other issues I ran into is with the tie rod flip with high angle joints there too. Well with the amount of lift I have and the location of the rack. It resulted in me triangulating the front suspension and making it ridged and unstable at speed. So ill be flipping it back tomorrow. And trying to maybe shim the rear uniballs. Ill make a post tomorrow with pictures once im satisfied with how it rides. Until then. Bask in the 2017 wrx heated sport package cloth seats i picked up for $400. Little dusty but the air gun cleaned them up pretty good. Thats also on the weekends to do list. May or may not get there