u/BeginningChart8932

I have a Bob Long VCOM. Recently, I tore apart the gun and serviced the LPR. I re-assembled the gun. Now it leaks down the barrel upon air up. When I take a shot, the bolt sticks forward and dumps air out until I turn the air off. I think I've narrowed it down, I don't believe it's the LPR. It doesn't leak when I have the pressure tester installed. I think that it's either the bolt or my pressure settings (re-set LPR after servicing). I was also thinking maybe it's the schrader valve. I tried setting the LPR between 50-60 PSI. The HPR was set to roughly 150-200 PSI. I can't seem to figure out why it's leaking. Any insight on what's causing the problem?

Is the latch system for the trigger frame supposed to detach from the body? I was swapping the frames and it fell off because it became lose. Now when I try to put it back in it doesn’t seem to want to stay in place. Is there a trick so assembling it back into the body? Also the latch didn’t seem to be laying flat, this was giving me issues getting the main bolt of the gun to slide in.