I got this ski off of marketplace a while back and have been tinkering with it as I can; I went through the entire electrical diagram and disconnected anything from the igniter that could be causing no spark. I’m about ready to sink the $300 into a new igniter, but I want to be sure first. The stator and rectifier are good, everything seems fine.
The only other issue aside from no spark is the KATS button causes the trim motor to make noise but not move the nozzle,
could there be something wrong causing the igniter to not spark?
Would it still not spark even if you unplugged the trim system from the igniter;
is it waiting for an “okay” signal from the trim control unit? How do I test for that?
Any info on how to get the KATS system working again is also helpful! The normal trim works fine but sometimes gets stuck and you have to turn the key off and on again for it to work. The ski started up and ran fine when I first got it, but I tried putting the cover back on the trim motor and it lost spark, which makes me think it’s not the igniter.
I hooked my ohmmeter up to the igniter but got a reading of OL on everything I tried. I’m stumped at this point beyond replacing the igniter, is there anything else I can do? Thanks!