My Friends and I started an instagram account called @thescenicbeer where we take beers to scenic places and on hikes so if you’re interested in more go ahead and follow (all cans are brought home with us btw) Busch apple is next and Budweiser as well. If you have any suggestions let us know
I bought this car 3 years ago, incredibly clean inside and out, for 4k and 218k miles, made it up to 267k until some lady ran a red light and pulled across 2 lanes of traffic and killed it. It never gave me a single issue other than tires and the steering rack
Hello everyone, I picked this camera up off of facebook marketplace today for a steal and everything seemed good except after some inspection and testing I found that the Shutter loads and fires but the shutter blades do not close and remain open after hitting the shutter release. When under 1/60 and the shutter is not cocked the shutter speeds won’t go past 1/30 but will freely move from 1/4-1/30 fine. When the shutter is cocked however you’re free to move back and forth between 1/4-1/500. However it will not go any lower than 1/4. You can hear the difference as well between M and X modes when fired and when the shutter is cocked. The self timer also works as well but has same issue of shutter blades not closing. Is this just a dried lubricant issue with the blades? I can live without being able to go below 1/4th but I’m thinking that may be a symptom of the issue. Focus works great however and so do the aperture blades as well