So I decided to make my own custom DB Beyblade, basically my take on what Ultimate Valtryek/Valkyrie should have been. Say hello to Zenith Valtryek/Zephyr Valkyrie!!! Its a right spin attack type, and I'd recommend using Evolution' or Variable', preferably with the first set of spikes worn down. I'll add my 3d model below! (please keep in mind that what worked for me may not work for others, it's just a recommendation and if anyone has any issues feel free to reach out and i'd be willing to help in any way possible!)
Now i have one version of this meant just to look good as a 3d model, and another for if you want the minute details of the face to come through. heres a photo of it 3d printed!
(my messaging app killed the quality)
Also anything I upload here is the print version, and you may need some sandpaper to remove the stuff supports leave behind and sand down any extra stuff. Id recomment eighty percent infill with gyroid for the DB blade, and 0.08 layer height/whatever its called in your slicer app. i would recommend 0.08mm layer height for everythng except the lock tabs and the DB core base. The file named DB Core Pt 1, use your slicer program to cut the REALLY thin bits at the bottom, before the 4 'screw' holes. You'd want to attach the DB core pt 1 to the base via some sort of adhesive like sticky tack or super glue around the central area, you don't really need to do it around the 4 screw holes. Ideally you should print the DB core base R with the teeth facing up, basically rotate it 180 degrees to get it to that point just for safety so the teeth have a higher chance of turning out well, i never had any issues printing it like this. Oh and, KEEP SUPPORTS ON NO MATTER WHAT (but tree supports). There may be some post print cleanup time required to brush the model up and remove the supports.
ALL CREDITS FOR THE BASE TEMPLATE GO TO CRAZY ARIES, PLEASE DONT USE THESE MODELS WITHOUT MY PERMISSION
https://drive.google.com/drive/folders/1UBm3fkohfz0tteCyMLfaGzFs4iYrOUnW?usp=drive_link
